Carbide Bur - Tree Shape (Pointed), MICRO Cut - 1/8"x1/4"x1/8" Shank - SG-41
 
Technical information
Bur dia.
1/8
Bur length
1/4
SCTI no.
SG-41
Shank dia.
1/8
Overall-length
1-1/2
Cut
MICRO
Packing unit
1 pcs.
EDP number
27546
 
Description
PFERD produces an extensive range of top quality carbide burs and bi-metal hole saws. PFERD burs deliver very high stock removal performance over their entire service life, providing outstanding results in minimal time.
Carbide burs with MICRO cut are specifically designed for finishing and are used in areas in which abrasive mounted points are usually used. They offer a higher stock removal rate and produce a high surface quality, particularly compared with conventionally milled surfaces.
They also operate with low vibration and little noise. They maintain their geometry over their entire service life, and are well suited to manual and machine applications. Almost all materials up to a hardness of 940 HV (68 HRC) can be machined.
 
Materials that can be worked:
Bronze
Other non-ferrous metals
Hard non-ferrous metal
Stainless steel (INOX)
Case-hardened steels
Steel, cast steel
Hardened, heat-treated steels over 1,200 N/mm2 (over 38 HRC)
Hardened, heat-treated steels over 1,200 N/mm2 (over 38 HRC)
Hardened, heat-treated steels over 700 N/mm² (> 220 HB)
Grey/nodular cast iron (GG/GJL, GGG/GJS)
Cast iron
Cobalt-based alloys
High-temperature-resistant materials
Hard non-ferrous metal
Nickel-based alloys (e. g. Inconell and Hasteloy)
Black cast iron (GTS, GJMB)
Annealed cast iron
Steel
Steel, cast steel
Steels up to 1,200 N/mm² (< 38 HRC)
Steels up to 700 N/mm² (< 220 HB)
Cast steel
Annealed cast iron
Titanium
Titanium alloys
White annealed cast iron (GTW, GJMW)
Tool steels
 
Applications:
Milling out
Weld dressing
Deburring
Cutting out holes
Surface work
Milling
Weld dressing
 
Drive types:
Flexible shaft drive
Straight grinder
Robot applications
Stationary machines
Stationary machines
Machine tool